CSCS Supervisory Specialist Mock Test

Welcome to our CSCS Specialist Supervisor mock test. If you are looking to get your gold Supervisor CSCS card then you will need to know all the questions in this exam.

There is a total of 76 multiple choice questions in this bank of questions that you will need to revise.

Supervisory Specialist Questions

1. You have to use a new material for the first time and need to carry out a COSHH assessment. What are the TWO main things you will need?

Question 1 of 76

2. If a prohibition notice is issued by an inspector of the Health and Safety Executive (HSE) or local authority:

Question 2 of 76

3. Under the requirements of the Work at Height Regulations, the minimum width of a working platform must be:

Question 3 of 76

4. The significance of a weekly or daily personal noise exposure of 87 decibels (dBA) is that:

Question 4 of 76

5. The current Construction (Design and Management) Regulations require a supported excavation to be inspected:

Question 5 of 76

6. What does the term ‘lower exposure action value’ mean when referring to noise?

Question 6 of 76

7. The minimum level of first-aid cover required at any workplace is an appointed person. Which of the following would you expect the appointed person to carry out?

Question 7 of 76

8. You will find the details of the welfare facilities that must be provided on site in which regulations?

Question 8 of 76

9. What is your LEAST reliable source of information when assessing the level of vibration from a powered, percussive hand tool?

Question 9 of 76

10. A design feature of some airbags used for fall arrest is a controlled leak rate. If you are using these, the inflation pump must:

Question 10 of 76

11. When setting up a fuel storage tank on site, a spillage bund must have a minimum capacity of the contents of the tank, plus:

Question 11 of 76

12. Which of the following precautions should be taken to prevent a dumper from falling into an excavation when tipping material into it?

Question 12 of 76

13. When overhead electric cables cross a construction site, it is recommended that goal-post barriers should be erected parallel to the overhead cables at a distance not less than:

Question 13 of 76

14. What must a subcontractor provide you with in relation to a worker who is 17 years old?

Question 14 of 76

15. A COSHH assessment tells you how:

Question 15 of 76

16. Under the current Construction (Design and Management) Regulations, what document must be handed to the client upon completion of the construction phase?

Question 16 of 76

17. Edge protection must be designed to:

Question 17 of 76

18. The number of people who may be carried in a passenger hoist on site must be:

Question 18 of 76

19. A competent person must routinely inspect a working platform:

Question 19 of 76

20. An employer has to prepare a written health and safety policy if:

Question 20 of 76

21. What should be included in a safety method statement for working at height? Give THREE answers.

Question 21 of 76

22. What is regarded as the last resort in the hierarchy of control for operatives’ safety when working at height?

Question 22 of 76

23. How should access be controlled, if people are working in a riser shaft?

Question 23 of 76

24. On the site electrical distribution system, which colour plug indicates a 415 volt supply?

Question 24 of 76

25. Employers must prevent exposure of their workers to substances hazardous to health, where this is reasonably practicable. If it is not reasonably practicable, which of the following should be considered first?

Question 25 of 76

26. The Work at Height Regulations require a working platform to be inspected by a competent person:

Question 26 of 76

27. What danger is created by excessive oxygen in a confined space?

Question 27 of 76

28. Under the current Construction (Design and Management) Regulations, who must develop the pre-construction information into a construction phase plan?

Question 28 of 76

29. Which piece of equipment is used with a cable avoidance tool (CAT) to detect cables?

Question 29 of 76

30. How could a site worker check if the RCD (residual current device) through which a 230 volt hand tool is connected to the supply is working correctly?

Question 30 of 76

31. Why may a young person be more at risk of having accidents?

Question 31 of 76

32. Ideally, a safety net should be rigged:

Question 32 of 76

33. Who should you inform if someone reports to you that they have work-related hand-arm vibration syndrome?

Question 33 of 76

34. Untidy leads and extension cables are responsible for many trips and lost work time injuries. What TWO things should you do to help?

Question 34 of 76

35. If your company is the principal contractor on a project that is notifiable under the current Construction (Design and Management) Regulations, you may come into contact with the CDM co-ordinator because of their legal duty to:

Question 35 of 76

36. Why is it important that hazards are identified?

Question 36 of 76

37. An emergency route(s) must be provided on construction sites to ensure safe passage to:

Question 37 of 76

38. What is the MAIN danger of leaving someone who has fallen suspended in a harness for too long?

Question 38 of 76

39. Before allowing a lifting operation to be carried out, you must ensure that the sequence of operations to enable a lift to be carried out safely is confirmed in:

Question 39 of 76

40. Apart from work for domestic clients, under the current Construction (Design and Management) Regulations, in which of the following situations must the Health and Safety Executive (HSE) be notified of a project?

Question 40 of 76

41. What should you do if you notice that operatives working above a safety net are dropping off-cuts of material and other debris into the net?

Question 41 of 76

42. For a ladder, what is the maximum vertical height that may be climbed before an intermediate landing place is required?

Question 42 of 76

43. Where should liquefied petroleum gas (LPG) cylinders be positioned when supplying an appliance in a site cabin?

Question 43 of 76

44. When putting people to work above public areas, your first consideration should be to:

Question 44 of 76

45. From a safety point of view, which of the following should be considered first when deciding on the number and location of access and egress points to a site?

Question 45 of 76

46. On a scaffold the minimum height of the main guard-rail must be:

Question 46 of 76

47. In considering what measures to take to protect people against risks to their health and safety, personal protective equipment (PPE) should always be regarded as:

Question 47 of 76

48. The Beaufort Scale is important when working at height externally because it measures the:

Question 48 of 76

49. What is the purpose of using a ‘permit to work’ system?

Question 49 of 76

50. When is it advisable to take precautions to prevent the fall of persons, plant or materials into an excavation?

Question 50 of 76

51. When should guard-rails be fitted to a working platform?

Question 51 of 76

52. What is the purpose of the health and safety file on a construction project?

Question 52 of 76

53. Before planning for anyone to enter a confined space, following the principles of prevention, what should be the first consideration of the manager or supervisor?

Question 53 of 76

54. On a scaffold the unprotected gap between any guard-rail, toe-board, barrier or other similar means of protection should NOT exceed:

Question 54 of 76

55. The monitoring and controlling of health and safety procedures can be either proactive or reactive. Proactive monitoring means:

Question 55 of 76

56. If a scaffold is not complete, which of the following actions should be taken by the site manager?

Question 56 of 76

57. Following a scaffold inspection under the Work at Height Regulations, how soon must a report be given to the person on whose behalf the inspection was made?

Question 57 of 76

58. Under the current Construction (Design and Management) Regulations, which of the following must the principal contractor ensure is specifically provided before allowing any demolition work to commence?

Question 58 of 76

59. Where a project is notifiable under the current Construction (Design and Management) Regulations, what must be in place before construction work begins?

Question 59 of 76

60. At what decibel (dBA) level does it become mandatory for an employer to establish hearing protection zones?

Question 60 of 76

61. The significant findings of risk assessments must be recorded when more than a certain number of people are employed. How many?

Question 61 of 76

62. The advantage of using safety nets rather than harness and lanyard is that:

Question 62 of 76

63. A RCD (residual current device) must be used in conjunction with 230 volt electrical equipment because it:

Question 63 of 76

64. In deciding what control measures to take, following a risk assessment that has revealed a risk, what measure should you always consider first?

Question 64 of 76

65. What is the best way for a supervisor or manager to make sure that the operatives doing a job have fully understood a method statement?

Question 65 of 76

66. Under the current Construction (Design and Management) Regulations, for how long must you keep inspection records on site?

Question 66 of 76

67. In the colour coding of electrical power supplies on site, what voltage does a blue plug represent?

Question 67 of 76

68. If there is a fatal accident or a reportable dangerous occurrence on site, when must the Health and Safety Executive (HSE) be informed?

Question 68 of 76

69. At what minimum noise level must you provide hearing protection to workers if they ask for it?

Question 69 of 76

70. Which TWO of the following factors must be considered when providing first-aid facilities on site?

Question 70 of 76

71. In the context of a risk assessment, what does the term 'risk' mean?

Question 71 of 76

72. When planning possible work in a confined space, what should be the first consideration?

Question 72 of 76

73. Which of the following is a fall-arrest system?

Question 73 of 76

74. Which of the following is a significant hazard when excavating alongside a building or structure?

Question 74 of 76

75. How should cylinders containing liquefied petroleum gas (LPG) be stored on site?

Question 75 of 76

76. Welding is about to start on your site. What should be used to protect passers-by from getting arc eye?

Question 76 of 76


 

CSCSExam.com depends on the generosity of its readers. We love providing Free mock tests to you, but if you value what we do, please consider making a donation. It helps us keep the site running.





Why Not Try Out These Tests Next

Leave a Reply

Your email address will not be published. Required fields are marked *

© Copyright 2021 - CSCS Exam - All Rights Reserved