CSCS Mock Test For Managers and Professionals

Written By: Ryan - Admin
Updated on: March 6, 2023

Welcome to our Free CSCS Mock Test For Managers and Professionals. If you are working on a construction site in a managerial role, you will have to take this test to get hold of your card, for example, the CSCS Black Managers card and the Academically or Professionally Qualified person cards.

We have included a wide range of questions in this test, there are over 450 questions selected at random to provide you with a 50-question managers CSCS card mock test. So please take this a few times so you can view the different questions and answers.

The managers and professionals CSCS is the same length as the CSCS test for Operatives, it is 45 minutes long, but you will need to score at least 46 out of 50 to pass the exam. There is a larger bank of questions to revise and 3 extra categories to learn:

CSCS Mock Test for Managers and Professionals

If you want to work on a construction site and gain your black card, then you will need to have a good understanding of these questions as you will be asked questions on them in the real exam.

In this mock test, we have provided the latest 50 questions you might be asked when sitting your real CSCS Test. In order to pass your managers and professionals test, you will need to score at least 46 out of 50 correct answers in 45 minutes.

1. What is the first question to ask if work may need to be carried out in a confined space?
A.
B.
C.
D.
2. What is a common example of a fragile roof material?
A.
B.
C.
D.
3. What is vibration white finger?
A.
B.
C.
D.
4. Which of the following is most likely to result in those who work with sheet lead having raised levels of lead in their blood?
A.
B.
C.
D.
5. What are two common fire risks on construction sites?
A.
B.
C.
D.
E.
6. When can male and female workers use the same toilet facilities on a construction site?
A.
B.
C.
D.
7. If a single vehicle is carrying out mobile highway works during the day, what must be clearly displayed on or at the rear of the vehicle
A.
B.
C.
D.
8. How can the likelihood of pedestrian injury be reduced? Select two answers.
A.
B.
C.
D.
E.
9. What danger is created by excessive oxygen in a confined space?
A.
B.
C.
D.
10. How can you help to prevent accidents?
A.
B.
C.
D.
11. Which two materials are most likely to release silica dust when being cut with a rotating blade?
A.
B.
C.
D.
E.
12. What does this sign mean? W021 Warning Flammable Material
A.
B.
C.
D.
13. Why do building sites use a 110 volt electricity supply instead of a 230 volt domestic supply?
A.
B.
C.
D.
14. Where would you find out the method for controlling identified hazards on a demolition project?
A.
B.
C.
D.
15. What is the main danger of leaving someone who has fallen suspended in a harness for too long?
A.
B.
C.
D.
16. Under the requirements of the Work at Height Regulations, what is the minimum width of a working platform?
A.
B.
C.
D.
17. What should you do if you see this label on a container or packaging? Ghs Corrosive
A.
B.
C.
D.
18. Under the Construction (Design and Management) Regulations 2015, which two of the following must the contractor consider in order to provide workers under their control with appropriate supervision?
A.
B.
C.
D.
E.
19. Which of the following is true in relation to the safe working load of lifting equipment, such as a cherry picker, lorry loader or excavator?
A.
B.
C.
D.
20. While observing an excavator digging a trial pit you notice that liquid is dripping and forming a small pool under the back of the machine. What could this mean?
A.
B.
C.
D.
21. If someone is using a disc cutter to cut concrete blocks, what three immediate hazards are likely to affect them?
A.
B.
C.
D.
E.
22. Which of the following is the safest place to store oxyacetylene gas welding bottles when they are not in use?
A.
B.
C.
D.
23. How should access be controlled, if people are working in a riser shaft?
A.
B.
C.
D.
24. What must a travelling first-aid kit not contain?
A.
B.
C.
D.
25. Where should you find out the number of people who may be carried in a passenger hoist on site?
A.
B.
C.
D.
26. Which two extinguishers should not be used on electrical fires?
A.
B.
C.
D.
27. Welding is about to start on the site you are visiting. What should be provided to prevent passers-by from getting arc eye?
A.
B.
C.
D.
28. How are legionella bacteria passed on to humans?
A.
B.
C.
D.
29. Under the Construction (Design and Management) Regulations 2015, who is responsible for notifying the relevant enforcing authority when a project is notifiable?
A.
B.
C.
D.
30. What does this sign mean? P013 No Activated Mobile Phone
A.
B.
C.
D.
31. What should workers do if they have been given a dust mask to protect them against hazardous fumes?
A.
B.
C.
D.
32. If work is being planned that will create dust, what action should be taken?
A.
B.
C.
D.
33. What does this sign mean? M010 Wear Protective Clothing
A.
B.
C.
D.
34. What is the purpose of an on site risk assessment?
A.
B.
C.
D.
35. What is the purpose of using a permit to work system?
A.
B.
C.
D.
36. A water fire extinguisher, identified by a red band, should only be used on what type of fire?
A.
B.
C.
D.
37. What happens if probation notice is issued by a health and safety executive inspector or local authority?
A.
B.
C.
D.
38. Who has a role to play in promoting fairness, inclusion and respect in the construction industry?
A.
B.
C.
D.
39. When should an excavation be battered back or stepped?
A.
B.
C.
D.
40. For safety reasons how should you store or use liquefied petroleum gas (LPG) cylinders used for heating the site cabin?
A.
B.
C.
D.
41. Why is it necessary to wear hi-vis clothing when working on roads?
A.
B.
C.
D.
42. When work is being carried out above public areas what should be your first consideration?
A.
B.
C.
D.
43. What is the significance of the weekly or daily personal noise exposure limit value of 87 decibel (dB(A)) set out in the Control of Noise at Work Regulations?
A.
B.
C.
D.
44. How should site-based staff and visitors be informed of the location of first-aid facilities on site?
A.
B.
C.
D.
45. Under the Construction (Design and Management) Regulations 2015, what must be recorded in writing before any demolition or dismantling begins?
A.
B.
C.
D.
46. When using a power tool to cut or grind materials, why must the dust be collected and not allowed to get into the air?
A.
B.
C.
D.
47. When must employers supply personal protective equipment (PPE)?
A.
B.
C.
D.
48. What should be the first consideration of the contractor’s responsible person before planning for anyone to enter a confined space?
A.
B.
C.
D.
49. When must you wear hi-vis (high-visibility) clothing?
A.
B.
C.
D.
50. What condition can be caused by direct sunlight on bare skin?
A.
B.
C.
D.

 

Whats invloved in the CSCS Test for Managers (MAP)

The CSCS test for managers, also known as the Management and Professional (MAP) Test , is designed to assess an individual's knowledge and understanding of health and safety in the construction industry. The test covers a range of topics, including:

  • General health and safety principles
  • Risk assessment and control measures
  • Fire safety
  • Manual handling
  • Personal protective equipment
  • Working at heights
  • Electrical safety
  • Environmental protection
  • First aid
  • Welfare facilities and provisions
  • Health and safety law

The CSCS test for managers consists of 50 multiple-choice questions, and applicants must answer at least 47 of them correctly to pass the test. The test is taken online, and applicants have 45 minutes to complete it. A CSCS card will be issued to individuals who pass the test, which allows them to work as managers in the construction industry.

Click on a star to rate it!

Average rating 4.7 / 5. 144

No votes so far! Be the first to rate this post.

Why Not Try Out These Tests Next

Leave a Reply

Your email address will not be published. Required fields are marked *

64 comments on “CSCS Mock Test For Managers and Professionals”

  1. I checked with the official app. The answer to this question is wrong:
    Which two of these activities are likely to need a hot-work permit?

    The correct answer shouldn't include:
    "Refuelling a diesel dump truck"

    1. Hi Dyl

      Thanks for the heads up, you are completely right! Not sure how this got mixed up on the results, but thank you for letting us know. This has now been corrected

  2. Excellent mock test. It helped to emphasize the importance of reading the question

  3. Great help. I want to donate towards this useful service but won't use email banking. If there's any other way to contribute I will certainly.

  4. What a great site. Really helpful in letting you gauge your knowledge level. Especially nice is that you can see where you have gone wrong and learn from mistakes

  5. Shows the importance of reading the questions fully, before answering, and not rushing to finish.

  6. These mock test are a real help, when sitting the test, you are not made aware of why you got a question wrong this is most frustrating not to under stand your error.

  7. it is really helpful
    most of these question are in actual exam
    Thank you

  8. Very good, my revision was based on the 2016 CITB booklet and all the areas of the mock were covered within it. I advise anyone to obtain the latest version of the booklet before attempting this exam.

  9. Q28 28. A. Which of these statements about personal protective equipment (PPE) is not true?
    A. Workers must use it as instructed
    B. Workers must report any damage or loss to their manager
    C. Workers must store it correctly when they are not using it
    D. Workers must pay for any damage or loss
    I answered D and it says I got it wrong?

ConstructionExam.co.uk is not associated or part of any scheme
or organisation such as the CSCS, CPCS or CITB. The only intention of this website is to
provide information about these schemes and their assessments.
? linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram