Fire Prevention and Control for Managers and Professionals

Welcome to this free mock on Fire Prevention and Control for Managers and Professionals. We have created a set of questions on this subject to help you pass your CSCS Test for the Managers and Professionals card this subject is part of the core knowledge questions.

If you want to work on a construction site then you will need to have good knowledge about this subject as you will be asked questions on them in the real exam.

In this mock test, we have provided the latest 18 questions you might be asked when sitting your real CSCS Test. In order to pass your managers and professionals test, you will need to score at least 46 out of 50 correct answers in 45 minutes.

There is no pass mark on this mini-test, so please keep using it until you know all of the questions from memory. Good Luck! Click here if you would like to site a full 50 question simulation Managers and Professionals mock test.

If you found this test helpful, let us know by leaving a comment.

Fire Prevention and Control for Managers and Professionals Questions

1. As a result of risk assessment, work is to be carried out under a hot-work permit. What must the permit specify?

Question 1 of 18

2. A foam extinguisher, identified by a cream band, should not be used on what type of fire?

Question 2 of 18

3. Place the five stages of a fire risk assessment in order
  • Record plan and train
  • Identify the people at risk
  • Evaluate the risks and plan
  • Periodically review
  • Identify the fire hazards

Question 3 of 18

4. How should acetylene and oxygen cylinders that are not in use be stored?

Question 4 of 18

5. Which two of these activities are likely to need a hot-work permit?

Question 5 of 18

6. What is HSG168 Fire Safety in Construction?

Question 6 of 18

7. What does a fire need to burn, in addition to heat and fuel?

Question 7 of 18

8. What should be in place on all construction sites to ensure fire precautions are adequately assessed?

Question 8 of 18

9. What does it mean if you see frost around the valve on a liquefied petroleum gas (LPG) cylinder?

Question 9 of 18

10. What are two common fire risks on construction sites?

Question 10 of 18

11. What type of fire extinguisher should not be provided where petrol or diesel is being stored?

Question 11 of 18

12. What is the first thing you should do if you discover a fire?

Question 12 of 18

13. What happens to the nozzle of a carbon dioxide (CO2) fire extinguisher when it is used?

Question 13 of 18

14. For safety reasons how should you store or use liquefied petroleum gas (LPG) cylinders used for heating the site cabin?

Question 14 of 18

15. How would you expect highly flammable materials to be stored?

Question 15 of 18

16. A water fire extinguisher, identified by a red band, should only be used on what type of fire?

Question 16 of 18

17. Which two extinguishers should not be used on electrical fires?

Question 17 of 18

18. What must contractors ensure when work is taking place in a corridor that is a fire escape route?

Question 18 of 18


 

CSCSExam.com depends on the generosity of its readers. We love providing Free mock tests to you, but if you value what we do, please consider making a donation. It helps us keep the site running.





Why Not Try Out These Tests Next

Leave a Reply

Your email address will not be published. Required fields are marked *

© Copyright 2021 - CSCS Exam - All Rights Reserved